Double Glazing Door Lock Repairs

Have your uPVC window or window repairs door mechanism started to fail? Maybe the handles on your uPVC windows or doors aren't aligned correctly or are difficult to use.

It is essential that your double glazed doors work smoothly, otherwise you'll be wasting energy and increase the chance of burglary. Owen the Locksmith can fix your door lock at an affordable price.

Snapped Key

If a key breaks within the lock, it can be incredibly difficult. It could also be a security problem because it could make you vulnerable to an intruder if the door is not locked. There are a few quick fixes you can make to fix the problem and make your door work again.

First, remember to stay calm. If you panic and start doing a lot of fumbling around you may end up pushing the damaged piece of the key further into the lock, which could make the situation worse.

Spray WD-40, or any other penetrating lubricant, into the lock. This will assist the broken piece to be removed more easily. You can also use a screwdriver to break up any pieces stuck. If you happen to have a small piece of the key sticking out it, you can make use of a paperclip or other metal object with a thin surface to grab it and then pull it out. Both methods are effective, but you need to be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges, which can be used as hook extractors, and some Jigsaw blades also work for this use. If you don't happen to have one of these tools then you can bend a hook using needle-nosed pliers. Finally, a pair of tweezers can be used to grasp and pull out the remaining part of the broken key.

If you cannot remove the broken piece of key then you can use a lock deicer. It is available at most hardware stores, and it works by freezing any moisture or ice that may be in the lock.

If none of these solutions seem to work, it might be time to consult a locksmith. Fitlocks experts can quickly fix issues such as broken handles or broken keys with uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms to ensure that they are more easy to use. You can request a double-glazing repair online or call us to discuss your requirements.

Broken Cylinder

A broken cylinder can pose an extremely risky security issue. It's fortunately a simple repair for a professional locksmith to complete. A locksmith must tap the cylinder in order to fix it. This can be done with a hammer or other tool. However, the most effective method is to use a wire or a long match. Then, position the match's tip or wire in the keyway. The locksmith will then hit the lock to break it. This is much safer than using a hammer, which could harm the lock.

The most frequent cause for cylinder head cracks is overheating. This can happen when the cylinder block and head are made of various metals, including cast iron and aluminum. When different metals heat up and cool down at different rates, it may create hotspots in the local area that expand faster than the rest of the cylinder head, thus leading to cracks.

Another possible cause for cracks in cylinders is corrosion. If the cylinder head as well as the block of the cylinder are not properly maintained, this can lead to rusting or corrosion, which may cause them to expand at a more than they should. This can lead to cracks in the future.

If your uPVC window or door lock is brittle and requires more pressure to turn it could be due to a variety reasons. A malfunctioning locking mechanism, misalignment or an old handle are the most common reasons for this issue.

Fortunately it's a simple and inexpensive fix for most homeowners of double glazing. A professional locksmith should be able to resolve this problem within an hour of arriving at your home. Depending on the needs of your home they will be able to replace the locking mechanism, change the window handles, and change the gearboxes. A locksmith with experience will always be able to advise you on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders that give you an extra layer of protection from burglars. It's a small price to pay for the peace of mind that comes from knowing that your uPVC doors are secure.

Broken Handle

Window handle locks are complex mechanisms that become less effective with age and usage, so it's no surprise that they sometimes break. It isn't easy to determine the cause of the broken window handle lock and fix it correctly.

Fixing the broken handle, whether it's an internal latch or locking mechanism can increase the security of your uPVC door and reduce the risk of draughts. It can be expensive to replace or repair your handle incorrectly and it can also damage the frame and window repair lock of your door.

Screwdriver When the window is open and the screw loose, loosen the handle. The screw should be located on the inside of the backplate. It is typically concealed by the cap of the screw for aesthetic reasons. Be sure to not damage any of the internal parts within the handle, like the plates or levers that are on either side of the spindle. Keep them in the same arrangement so that it is simpler to replace them in the event of a need.

Then, turn the handle to make it 90 degrees to the window frame and loosen the screw at the back of the handle that fixes it to the internal spindle using a second screwdriver. Once the screw is loose, you can remove the handle and remove the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can buy them on the internet or in hardware stores). Securely screw it in the correct position. Don't over tighten the screw as this can damage the handle and the window frame.

Close the handle and try it. Hopefully, it will work smoothly and you'll be able to open your window once more.

Be sure to double-check that your uPVC window repair near me is shut properly while you're working with the handle. If they're not closing correctly, you could encounter damp or draughts in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on the window frames to ensure that they close properly.

Broken Spindle

It is more common for the spindle to break rather than the handle. This is especially common with upvc door repairs near me tilt-and-turn windows. These kinds of windows require a handle that is a lock mechanism that is located in the frame of the window. The handle is attached to a central rod that triggers the cams with a mushroom shape that secure into the frame of the window keep. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has broken This can be a very frustrating issue.

Luckily, there are options to remedy this situation. A reputable locksmith will be able to quickly and efficiently repair this issue. A reputable locksmith will be able to disassemble the window's handle using a tool that removes the wheel portion that houses the spindle. This can be done without damage to the handle or window frame.

After removing the wheel the technician can examine the spindle and identify what caused it to break. This involves breaking down the spindle into its constituent parts and carefully recording their general condition as in addition to any specific areas of wear or damage. This procedure is usually carried out in a clean, well-lit room by skilled technicians.

Then, clean the damaged spindle. This will remove any debris or dirt that may be obstructing it from operating normally. Following this the spindle is cleaned, it could be repaired or replaced. If the technician is replacing the spindle he can use a dowel that is the same size to the original. He will then make holes in the same way into both pieces. This will ensure that the spindle is perfectly matched with the handle.

If the damaged spindle cannot be repaired, it might need to be replaced entirely. Home centres sell generic substitutes but if the window design is unusual you'll require contacting an expert in woodworking or cabinet making who can replicate the exact piece. Once the new spindle is installed, it can be positioned to the handle by lining up the screw holes on the handle with the frames existing screws. Once the new handle is installed, you are now ready to operate your uPVC window.